Cooper & Hunter
Mini-Splits in Lone Tree
Authorized Cooper & Hunter dealer installing Hyper Heat cold-climate systems, PEAQ R454B series, multi-zone, ceiling cassettes, slim ducts, and air handlers for condos, executive homes, and new construction developments in Lone Tree. Built for 5,280 ft elevation. Xcel rebates up to $2,250/ton.
Cooper & Hunter
in Lone Tree
Lone Tree’s Park Meadows-area condos, SkyRidge executive homes, and RidgeGate new construction benefit from C&H’s quiet, efficient Hyper Heat systems with –22°F cold-climate performance.
Every C&H system we install is sized for Colorado’s altitude and climate. Hyper Heat’s –22°F minimum gives significant margin over Denver’s design heating temperature of –5°F — important for homeowners looking for reliable primary heat, not just supplemental conditioning.
View all Cooper & Hunter products and services →Hyper Heat — cold-climate to –22°F
C&H’s Hyper Heat series operates continuously to –22°F — one of the lowest ratings in the industry. Available 6K–60K BTU, single and multi-zone, for Lone primary heating.
PEAQ Series — R454B future-proof refrigerant
The PEAQ series uses R454B, with 78% lower GWP than R410A. Up to 18.6 SEER2 in 24K size. A forward-looking choice for Lone homeowners who want the most environmentally responsible system.
Best value cold-climate performance in Lone
C&H Hyper Heat costs 10–20% less than comparable Mitsubishi, Daikin, or Fujitsu cold-climate systems — while still qualifying for $2,250/ton in Xcel cold-climate rebates.
Full form factor coverage
Wall mounts, ceiling cassettes, slim ducts, floor consoles, and air handlers — C&H covers every installation scenario for Lone’s mix of condos, executive homes, and new construction developments.
C&H Systems for Lone
Cold-climate Hyper Heat, R454B PEAQ series, multi-zone, cassettes, slim ducts, and air handlers — the full C&H lineup for Lone Tree.
Hyper Heat Series (HPR)
C&H’s cold-climate flagship. Heats to –22°F, up to 26.4 SEER2 in 9K. Base pan heater, oversized heat exchanger, inverter compressor. The primary heating choice for Lone.
Multi-Zone Hyper Heat
Whole-home Hyper Heat coverage from a single outdoor unit. 2–5 indoor zones with individual control. Mix wall mounts, cassettes, and slim ducts for Lone homes.
PEAQ Series
R454B refrigerant — 78% lower GWP than R410A. Up to 18.6 SEER2 in 24K. Available 18K–55K BTU. The future-forward choice for Lone eco-conscious homeowners.
Ceiling Cassettes
Recessed 4-way and 2-way cassettes for open-plan Lone living rooms, great rooms, and commercial spaces. 9K–48K BTU. Pairs with Hyper Heat outdoor units.
Slim Ducts & Air Handlers
Concealed slim duct units (9K–60K) for short duct runs and ducted air handlers (18K–60K) for whole-home coverage using existing ductwork in Lone homes.
RHP Standard Series
C&H’s standard inverter single-zone systems — cost-effective heating and cooling for individual rooms across the full 6K–36K BTU range. A practical choice for Lone supplemental zones.
Rebates Available
in Lone Tree
C&H Hyper Heat cold-climate models qualify for Colorado’s highest available rebate tier — $2,250 per ton from Xcel. We apply rebates as upfront discounts at installation. No filing required on your end.
Xcel cold-climate rebate: $6,750 applied upfront. Income-qualified households may add up to $8,000 through HEAR — total savings up to $14,750.
C&H Hyper Heat cold-climate models qualify for Xcel’s highest rebate tier. A typical 3-ton system earns $6,750 in rebates applied upfront at installation. We handle all paperwork.
Income-qualified households (under 150% AMI) may receive up to $8,000 through Colorado’s HEAR program. Stackable with Xcel rebates for maximum savings.
If your C&H installation requires an electrical panel upgrade, Xcel offers up to $1,500 toward the panel work.
Why Lone Homeowners
Choose Cooper & Hunter
Genuine cold-climate performance, competitive pricing, and a growing U.S. dealer network — C&H is the value-forward choice for Colorado heat pump installations.
–22°F cold-climate operation
Hyper Heat operates to –22°F — significant margin over Denver’s design heating temperature of –5°F. The base pan heater, oversized heat exchanger, and high-capacity inverter compressor are specifically engineered for sub-zero operation in Lone.
10–20% less than premium brands
C&H Hyper Heat systems typically cost 10–20% less than comparable Mitsubishi, Daikin, or Fujitsu systems — while delivering the same cold-climate performance and qualifying for the same $2,250/ton Xcel rebate.
R454B — first major brand to market
C&H’s PEAQ series is one of the first residential mini-split lines using R454B refrigerant — 78% lower GWP than R410A. A forward-looking choice as the EPA’s AIM Act progressively phases down R410A across the industry.
Up to 26.4 SEER2
The HPR 9K Hyper Heat reaches 26.4 SEER2 — one of the highest single-zone efficiency ratings across all mini-split brands. Strong efficiency across the full lineup from 6K to 60K BTU.
Complete form factor lineup
Wall mounts, 2-way and 4-way ceiling cassettes, slim ducts, floor consoles, floor/ceiling units, and air handlers — C&H covers every installation scenario for Lone’s condos, executive homes, and new construction developments.
7-year warranty when dealer-installed
Cooper & Hunter offers a 7-year limited parts and compressor warranty when installed and registered by an authorized dealer. We register every system at installation at no extra charge.
Cooper & Hunter FAQs for Lone
How does Cooper & Hunter compare to Mitsubishi or Fujitsu for Lone Tree?
How much does a Cooper & Hunter system cost installed in Lone Tree?
Does C&H Hyper Heat qualify for Xcel rebates in Lone Tree?
What is the PEAQ series and what makes it different?
Does altitude affect C&H performance in Lone Tree?
Do you service Cooper & Hunter systems you didn’t install?
C&H Installation Across
Denver & the Front Range
We install and service Cooper & Hunter mini-splits throughout the Denver metro and Colorado Front Range.
Free C&H Estimate in Lone Tree
Authorized dealer · Free load calculation · Xcel rebate up to $2,250/ton · Permits handled
Mini Splits by Joseph · Denver, CO · Authorized C&H Dealer · Licensed Colorado HVAC