Fujitsu Mini-Split Installation in Lakewood | XLTH –15°F Cold-Climate
✅ Authorized Fujitsu Dealer · Lakewood

Fujitsu Mini-Splits
in Lakewood

Authorized Fujitsu Airstage dealer installing XLTH cold-climate heat pumps for ranch homes, split-levels, condos, and mountain-view properties in Lakewood. Sized for 5,280 ft elevation. Xcel rebates up to $2,250/ton.

❄️ XLTH to –15°F 🏆 33.1 SEER2 Orion XLTH+ 💰 $2,250/ton Xcel Rebate 🛡️ Up to 12-Year Warranty 🧪 R32 Refrigerant
–15°FXLTH Min Heat Temp
33.1Max SEER2
$2,250Xcel / Ton Rebate
12yrElite Warranty
R32Airstage Refrigerant
Fujitsu in Lakewood

The Right Fujitsu System
for Lakewood Homes

Lakewood’s established neighborhoods, mountain-view homes, and Belmar condos are a strong Fujitsu market, especially for homes without existing ductwork or with aging forced-air systems.

Every system we install is sized for Colorado’s altitude and climate. Fujitsu’s XLTH technology heats continuously to –15°F — the lowest operating temperature of any mini-split brand — making it the most capable primary heat source for Lakewood homes on the coldest Colorado nights.

View all Fujitsu models and specs →
❄️

XLTH — heats to –15°F, the lowest of any brand

Fujitsu’s XLTH technology heats continuously to –15°F with a base pan heater, oversized heat exchanger, and high-capacity compressor. No other single-zone mini-split brand goes lower — essential for Lakewood’s coldest nights.

🏆

33.1 SEER2 — highest efficiency single-zone

The Orion XLTH+ 9K achieves 33.1 SEER2 — one of the highest efficiency ratings of any residential mini-split. Fujitsu consistently leads the industry in single-zone efficiency, meaning lower energy bills for Lakewood homeowners.

💰

Xcel rebates up to $2,250 per ton

Fujitsu XLTH cold-climate models qualify for Xcel’s highest rebate tier. We handle all paperwork and apply rebates as upfront discounts — no filing on your end.

🛡️

Up to 12-year Elite warranty

Standard registration earns 10 years parts and compressor. Fujitsu Elite contractor installations (that’s us) extend to 12 years — matching the longest warranty in the industry.

Fujitsu Models

Systems We Install in Lakewood

From a single-room XLTH unit to whole-home multi-zone systems — every Fujitsu Airstage model, every application.

Flagship · XLTH · R32 · 33.1 SEER2

Orion XLTH+

Fujitsu’s flagship. 33.1 SEER2, XLTH to –15°F, ProCore copper coils, and ESP occupancy sensor. The top choice for Lakewood primary heating and maximum efficiency.

33.1SEER2
–15°FMin Heat
19dBIndoor
XLTH · Cold-Climate · Built-in WiFi · R410A

Halcyon XLTH

Fujitsu’s proven XLTH platform with built-in WiFi. Heats to –15°F with 33.1 SEER2 in 9K. Available while supplies last; being replaced by the Orion XLTH+ for new installs.

33.1SEER2
–15°FMin Heat
WiFiBuilt-in
Performance · R32

Altair 500

Mid-tier R32 performance wall mount with solid efficiency. Heats to 5°F — a great balance of features and price for Lakewood homes that don’t need extreme cold-climate performance.

22SEER2
5°FMin Heat
R32Refrigerant
Best Value · R32 · 115V Option

Altair 300

Most affordable Fujitsu system with R32 refrigerant. Available in 115V — no electrician needed. Great for guest rooms, garages, and supplemental heating anywhere in Lakewood.

17SEER2
5°FMin Heat
115VOption
XLTH Multi-Zone · R32 · Up to 5 Zones

Airstage XLTH Multi-Zone

Cold-climate multi-zone condenser with XLTH technology. One outdoor unit controls 2–5 indoor units to –15°F — perfect for whole-home coverage in Lakewood.

5Max Zones
–15°FMin Heat
R32Refrigerant
Ducted · Whole-Home · XLTH Available

Airstage Air Handler

Multi-position air handler that replaces your gas furnace using existing ductwork. Pairs with XLTH outdoor units for –15°F cold-climate performance. 30–60K BTU range.

18+SEER2
–15°FXLTH Option
60KMax BTU

View full Fujitsu model specs and comparison →

Xcel Rebates

Rebates Available
in Lakewood

Fujitsu XLTH cold-climate models qualify for Colorado’s highest available rebates. We handle all paperwork and apply rebates as upfront discounts — you don’t file anything.

💡 Example: 3-Ton Orion XLTH+ Multi-Zone System

Xcel cold-climate rebate: $6,750 applied upfront at installation. Income-qualified households may add up to $8,000 more through HEAR, bringing total savings to $14,750.

💰 Xcel Energy — $2,250/Ton

XLTH cold-climate models (Orion XLTH+, Halcyon XLTH, Airstage XLTH multi-zone) qualify for Xcel’s highest rebate tier. Standard models qualify at $900/ton.

🏠 HEAR — Up to $8,000

Income-qualified households (under 150% AMI) may receive up to $8,000 through Colorado’s Home Electrification & Appliance Rebate program. Stackable with Xcel rebates.

⚡ Panel Upgrade — $1,500

If your Fujitsu installation requires an electrical panel upgrade, Xcel offers up to $1,500 toward the panel work.

Why Fujitsu

Why Lakewood Homeowners
Choose Fujitsu

Fujitsu has been making mini-splits since 1936 and is widely known as the “single-zone king” — the brand that consistently tops efficiency charts for individual room heating and cooling.

❄️

–15°F XLTH — lowest of any brand

XLTH stands for “Extra Low Temperature Heating.” Fujitsu’s XLTH systems heat continuously to –15°F with a base pan heater, oversized heat exchanger, and high-capacity compressor built specifically for sub-zero operation.

🏆

33.1 SEER2 — single-zone king

The Orion XLTH+ 9K hits 33.1 SEER2 — one of the highest efficiency ratings of any residential mini-split on the market. Fujitsu consistently leads the industry in single-zone efficiency.

🛡️

Up to 12-Year Elite Warranty

Fujitsu Elite contractor installations earn 12-year parts and compressor coverage — matching the longest warranty in the industry. We register every system at no extra charge.

🧪

R32 Airstage Refrigerant

Fujitsu’s Airstage lineup uses R32 with 68% lower GWP than R410A and 15–20% better heat transfer efficiency. The Orion XLTH+, Altair 500, and Altair 300 are all R32.

💡

ESP Occupancy Sensor

Fujitsu’s ESP sensor detects when you leave the room and automatically adjusts the temperature to save energy. When you return, it resumes your settings — no manual adjustment needed.

🔇

19 dB Whisper-Quiet

Indoor noise as low as 19 dB — quieter than a library. Fujitsu’s advanced fan blade design and inverter compressor keep both indoor and outdoor units remarkably quiet.

Common Questions

Fujitsu FAQs for Lakewood

How much does a Fujitsu mini-split cost installed in Lakewood?
A single-zone Fujitsu system typically runs $3,500–$6,500 installed depending on model and BTU size. The Orion XLTH+ runs at the higher end; the Altair 300 at the lower end. Multi-zone systems range from $8,000–$22,000+ for 2–5 zones. Before rebates — XLTH cold-climate models qualify for $2,250/ton from Xcel, which offsets $4,500–$6,750+ on most projects. We always quote after rebates so you see real out-of-pocket cost.
Which Fujitsu model is best for Lakewood primary heating?
The Orion XLTH+ is our top recommendation for primary heating in Lakewood. It heats continuously to –15°F — the lowest operating temperature of any mini-split brand — and achieves up to 33.1 SEER2. For whole-home coverage, the Airstage XLTH multi-zone condenser pairs up to 5 XLTH-capable indoor units on a single outdoor unit, giving you room-by-room control across the whole house.
Does altitude affect Fujitsu performance in Lakewood?
Yes — at 5,280 ft elevation, refrigeration equipment loses efficiency because thinner air reduces how well condensers reject heat. We account for altitude in every load calculation so the system we specify performs on Denver’s hottest summer day, not just on a sea-level spec sheet. This is something many out-of-state suppliers miss entirely.
Can a Fujitsu system replace my gas furnace in Lakewood?
Yes. The Fujitsu Airstage Air Handler (AMUG-LMAS series) replaces your furnace and AC using existing ductwork. When paired with an XLTH outdoor unit, it’s cold-climate rated to –15°F. For homes without ductwork, the Airstage XLTH multi-zone system provides whole-home heating through 2–5 ductless indoor units with individual zone control.
How long does Fujitsu installation take?
Single-zone installs typically take one day. Multi-zone systems with 3–5 indoor units take 1–2 days. Ducted air handler replacements usually take 1–2 days depending on the home. We handle all permitting and inspection coordination — most permits in Denver metro jurisdictions are approved within 1–3 business days.
Do you service Fujitsu systems you didn’t install?
Absolutely. We service and repair all Fujitsu models regardless of who installed them — Orion XLTH+, Halcyon XLTH, Altair 500, Altair 300, multi-zone condensers, floor consoles, slim duct units, and air handlers. If your system is showing an error code, not heating, or freezing up, call us. We carry common Fujitsu parts and can often diagnose and fix issues in a single visit.

Free Fujitsu Estimate in Lakewood

Tell us your home and what you need — we’ll get back to you the same business day with a clear quote after rebates.

Mini Splits by Joseph · Denver, CO · Authorized Fujitsu Airstage Dealer · Licensed Colorado HVAC

Contact Us

Join our thousands of satisfied customers in the Denver, CO, area and contact us today for all your air conditioning needs!



    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.