Panel Upgrade in Aurora, CO: EV Chargers & Heat Pumps

Electrical Services · Aurora, CO

Panel Upgrade in Aurora, CO: EV Chargers & Heat Pumps

Aurora's older housing stock — much of it built in the 1970s and 1980s — is running out of headroom. A 100-amp panel was designed for the appliances of that era, not for a modern heat pump, two EV chargers, and a hot tub. Mini-Splits By Joseph handles electrical panel upgrades in Aurora, CO as part of a complete electrical and HVAC service so you get everything done by one crew, one company, one call.

Call 303-219-1000

An electrical panel upgrade in Aurora, CO is quickly becoming one of the most-requested jobs we schedule. The city's population has grown dramatically, and homeowners are electrifying everything at once: heat pumps replacing gas furnaces, Level 2 EV chargers in the garage, induction ranges in the kitchen. The result is that the utility panel — often a 100-amp or 125-amp service — becomes a bottleneck. Circuits trip, appliances underperform, and new loads simply can't be safely added without an upgrade.

Mini-Splits By Joseph installation crew working at a home in Aurora, Colorado
Our crew handles both the electrical panel work and the heat-pump installation — no handoffs, no waiting for a second contractor.

Why Aurora Homes Need a Panel Upgrade Before Adding a Heat Pump

A ducted heat pump or a multi-zone ductless system requires a dedicated 240-volt circuit, typically drawing between 20 and 60 amps depending on the tonnage. Add a Level 2 EV charger (another 32–50 amps) and a panel that was fine in 1985 is suddenly oversubscribed. Before we pull a permit for a heat pump installation in a home with an undersized panel, we do a load calculation to see what's actually available.

The most common scenarios we encounter in Aurora:

  • 100-amp service with a full bus: No room for new double-pole breakers. An upgrade to 200-amp service — or 400-amp for larger homes — is required.
  • Federal Pacific or Zinsco panels: These older panels carry a known fire and shock risk. We won't add circuits to them; we replace them entirely.
  • 125-amp service with space on the bus: Sometimes a tandem breaker and careful load balancing is enough for a single-zone mini-split, but not always — it depends on what else is running.
  • Split panels or daisy-chained sub-panels: Older homes that added a workshop or garage sometimes have panels feeding panels. We consolidate and upgrade at the same time.

Our Electrical Panel Upgrade Process in Aurora, CO

When you call 303-219-1000, we schedule a site visit to assess your current panel, your planned loads, and the utility's available service ampacity. Here is what the process looks like from start to finish.

  • Load assessment: We calculate your existing load and the demand from every new appliance you plan to add — heat pump, EV charger, induction range, whatever is on the list.
  • Utility coordination: Aurora is served by Xcel Energy. For larger service upgrades (200 to 400 amp, or converting overhead to underground service), we coordinate directly with Xcel on the transformer and service entrance work.
  • Permit and inspection: We pull the permit from the City of Aurora. All electrical work is inspected by the city before the panel is energized — no shortcuts.
  • Same-day heat pump wiring: If you are also having us install a mini-split or heat pump, we run the dedicated circuit and mount the disconnect the same day — no second trip, no second scheduling window.

Our crews are Mini-Splits By Joseph employees. We do not use subcontractors, so the same team that assessed your panel is the team that does the work.

Xcel Energy Rebates for Heat Pumps in Aurora

One reason tackling an electrical panel upgrade in Aurora is especially worthwhile right now: Xcel Energy offers significant rebates for cold-climate heat pumps that become the home's primary heating source (covering 50 percent or more of the heating load). The rebate is $1,500 per ton at 5°F, which can reach $3,000–$7,500 on a whole-home system before additional state incentives stack. Mini-Splits By Joseph also files the Power Ahead Colorado rebate ($1,500) on your behalf — you do not handle the paperwork.

To qualify for the full per-ton rebate the system must be a qualifying cold-climate model. Fujitsu — our primary line — meets every Xcel threshold. We provide the documentation the utility requires.

Mini-Splits By Joseph service van parked outside a customer home in Aurora, Colorado
Mini-Splits By Joseph serves Aurora and the entire Denver metro. Call 303-219-1000, Monday–Thursday 9 am–6 pm or Friday 9 am–4 pm.

EV Charger Circuits: What Aurora Homeowners Should Expect

Level 2 EV chargers run on 240-volt circuits with a 50-amp breaker (for a 40-amp continuous draw). If you are adding both a heat pump and an EV charger, that is easily 80–100 amps of new load. Without a panel upgrade, most Aurora homes built before 2000 cannot accommodate that combination safely. We wire EV charger circuits to NEMA 14-50 receptacles or hardwired EVSE units depending on your preference, and we can install the circuit at the same time as the panel work.

Some Aurora households are adding two EV charger circuits — one for each vehicle — which makes a 200-amp panel a near-requirement and a 400-amp panel worth discussing if you are also electrifying your whole-home HVAC at the same time. We will walk through the numbers with you during the estimate.

Pricing: Panel Upgrades Paired With Heat Pumps

Electrical panel work is priced by scope, because every home is different. Heat pump systems we install run from $4,500 to $10,500 installed for single-zone systems and $12,500 to $35,000 for multi-zone whole-home systems — both figures before Xcel Energy rebates. We provide itemized estimates that show the panel work and the heat pump side separately so you can see exactly where the money goes. Our electrical services page has more detail on what we handle on the electrical side.

Frequently asked questions

Do I need a permit to upgrade my electrical panel in Aurora, CO?

Yes. The City of Aurora requires a permit and inspection for all electrical service upgrades. Mini-Splits By Joseph handles the permit application and schedules the inspection — you just need to be available during the inspection window, which we coordinate with you in advance.

How long does a 200-amp panel upgrade take?

Most panel upgrades take one day for the physical installation. If Xcel Energy needs to swap the meter or upgrade a transformer, their scheduling can add a few days. When we combine the panel work with a heat pump installation, we typically plan for a one- to two-day project window and will give you a specific timeline at your site assessment.

Can I get rebates for the panel upgrade itself?

The Xcel Energy and Power Ahead Colorado rebates apply to the heat pump equipment and installation, not to the panel upgrade itself. That said, the panel upgrade is what makes the rebate-qualifying heat pump installation possible. We walk you through the full rebate math during the estimate so you can see the true net cost of the complete project.

Does Mini-Splits By Joseph serve Aurora, CO?

Yes — Aurora is a primary service area for us. We cover the entire Denver metro and Front Range. Call 303-219-1000 Monday through Thursday 9 am to 6 pm, or Friday 9 am to 4 pm, to schedule a site assessment.

Ready to Upgrade Your Panel in Aurora?

Mini-Splits By Joseph handles the full project — panel upgrade, heat pump installation, EV charger circuits — with our own trained crews and no subcontractors. Request an estimate online or call us directly.

Call 303-219-1000

Contact Us

Join our thousands of satisfied customers in the Denver, CO, area and contact us today for all your air conditioning needs!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.